Sub-Zero & Wolf Repair San Diego

The service call is free when you go ahead with the repair, and our $15.00 internet coupon comes off the repair price. If you decide not to repair, the service call is $99.00. The technician gives you a written estimate before starting, so you know the full price before you decide.

A Sub-Zero that's running warm usually has one of these problems:

• Dirty Condenser: Built-in Sub-Zero refrigerators have the condenser at the top, behind the grille. When it's covered in dust, the compressor runs constantly and can't keep the unit cold. It should be cleaned about every six months.
• Fan Motors: If the condenser fan or evaporator fan stops, cold air isn't moved where it needs to go. You may hear the compressor run with no airflow.
• Defrost Problems: Frost building up on the back wall of the freezer blocks airflow. A failed defrost heater, thermostat or control is usually the cause.
• Sealed System: If the compressor runs but nothing gets cold, the sealed system may have a leak or a failing compressor. This needs a technician with sealed-system equipment.

Learn more about our Sub-Zero refrigerator not cooling repair service.

When the ice maker stops, check these first:

• Ice Maker Switch: Make sure the ice maker is turned on at the control panel and the bin is in place.
• Water Filter: A clogged or overdue water filter slows the fill and makes small, hollow cubes. Sub-Zero recommends replacing it every six months.
• Freezer Temperature: The freezer needs to be at 0°F or colder for the ice maker to cycle. If the freezer is warm, fix that first.
• Water Valve or Frozen Fill Tube: If the ice maker cycles but no water comes in, the water valve has failed or the fill tube has frozen.

Learn more about our Sub-Zero ice maker repair service.

Water on the floor or ice on the bottom of the freezer most often comes from a clogged defrost drain. A loose water filter, a cracked water line or an overfilling ice maker can also leak. Turn off the water supply to the refrigerator if the leak is steady, and call for service.

Learn more about our Sub-Zero refrigerator leaking repair service.

A Wolf oven that won't heat or won't reach temperature usually has one of these causes:

• Bake or Broil Element: On electric and dual fuel ovens, a burned-out element is a common cause. You may see a break or a blister on the element.
• Gas Oven Igniter: On all-gas Wolf ranges, a weak igniter doesn't open the gas valve, so the oven never lights.
• Temperature Sensor or Control: A failed sensor or control board can stop the oven from heating, cause long preheat times or show an error message.

Learn more about our Wolf oven not heating repair service.

Constant clicking usually means moisture or spilled food has reached the burner or the igniter. Let the cooktop dry completely and make sure the burner caps are seated flat. If a burner still won't light or keeps clicking after it's lit, the igniter, a burner switch or the spark module needs service.

Learn more about our Wolf burner repair service.

Usually, yes. Sub-Zero and Wolf appliances are built to last 20 years or more, parts are available for older models, and a built-in replacement often means new cabinetry or panels. The technician will tell you honestly if a repair doesn't make sense.

We specialize in Sub-Zero and Wolf repair across San Diego County, from La Jolla and Del Mar to Carlsbad, Chula Vista and El Cajon. Our service includes maintenance, diagnostics and repair for Sub-Zero refrigeration, Wolf cooking appliances and Cove dishwashers.

Call (619) 339-5682 or schedule service online.